Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3

32-Channel A-S3208D1 TapCMS Pro H.264 Full 960H/D1 Recording, HDD Bay x 5, 8-Audio, Mac Ready

SKU: A-S3208D1
  • 960H/D1/Half D1/CIF Real-Time Recording. Recording 960x480/720x480/720x240/360x240 at 30 FPS per channel. Support 1/4/8/9/16/25/32CH simultaneous playback.
  • View remaining HDD capacity & estimated recording time frame. Motion triggered events can be notified by loudly audible buzzer and / or by email.
  • Provide self-adaptive 10M/100M/1Gbps network interface. Dual streaming technology to encode recording stream and network stream separately. Support RTSP.
  • 5 x HDD bay, support up to 30TB. 1 x E-Sata Port, RS-485 and RS-232 for PTZ, keyboard control, POS, and GPS. Firmware upgradable.
  • Live view through all browsers on PC and Mac. Streaming live video / playback on mobile smart phones or tablets via free app.

 

 


H.264 Video Compression Main Profile (8) Audio In
(2) Audio Out
ips-480-400.gif 960 Image per second (NTSC)
800 Image per second (PAL)
VGA Output
HDMI Output
BNC Output
Remote access from
PC, Mac OSX, iPhone/iPad, and Android Devices
USB Back up and Configuration
io.gif (16) Alarm In
(4) Alarm Out NC/NO
ptz.gif RS-485 & RS-232 for PTZ Cameras, POS, and GPS

With the passion of perfection, Aposonic has released its newest online monitoring platform, which provides users the capability to consolidate multiple surveillance DVRs, from the same series, over the web browser or the CMS software. Users can monitor multiple DVRs and locations at the same time. Up to 64 channels of live streaming cameras can be viewed simultaneously.



Aposonic A-S3208D1 DVR supports streaming video on PC, Mac OSX, iPhone, iPad, Android phone and tablet. Users are able to monitor their most valuable assets anywhere around the world with their mobile devices over WiFi or 3G/4G LTE network.

Watch your properties on the go with our TapCMS/ TapCMSHD mobile app which is capable of viewing live video feed, playing recorded footage, taking snapshot, controling PTZ cameras, and switch between multiple DVRs.

Compatible with iPhone, iPad, Android Phones and Android Tablets. Monitor your precious assets anytime, anywhere. TapCMS makes your life easier!


Specification

Video Compression H.264 High Profile
Audio Compression ADPCM
Multiplex Sixfold Operation - Simultaneous record, live view, playback, backup, setup, and remote access
Video Input 32 Ch BNC 1 Vp-p / 75 Ohm
Video Output HDMI, VGA, CVBS (BNC)
Display Resolution HDMI & VGA @ 1920 x 1080, BNC @ 720 x 480
Digital Zoom 2X & 4X
Record Rate 960 FPS @ 960H / 720 x 480 / 720 x 240 / 360 x 240
Playback Rate 480 FPS @ 960H / 720 x 480,  960 FPS @ 720 x 240 / 360 x 240
Record Mode Manual, Scheduled, Alarm, Motion
Record Feature Pre-record time: 0-10 sec, Post-record time: 0-60 min, Video Motion Dection, Video Loss Detetion
Network Connection 1x RJ-45 Ethernet 1G/100M/10Mbps
Network Protocol TCP/IP, HTTP, PPPoE, DHCP, DDNS, TSP
Web Access Internet Explorer (Control Interface & Video Streaming), Firefox, Chrome, Safari
Remote Users Up to 8 users simultaneously
Mobile App TapCMS for iPhone / Android Phones & TapCMSHD for iPad and other tablets
Event Notification/Push Alarm
E-Mail / Mobile devices
Audio In 8x RCA In, Line-in level (100mV - 1Vrms)
Audio Out 2x RCA Out, Line-in level (up to 1Vrms)
Alarm In 16 contact or TTL/CMOS signal, polarity selectable
Alarm Out 4 Normally open or Normally Closed relay output
RS485 2-pin for keyboard / PTZ control
RS232 1 D-type female connector for PTZ, POS, or GPS
HDD Stroage 5 Bays of 3.5" SATA HDD, up to 6TB each, total 30TB
HDD Extension 1 eSATA connector, support up to 5 HDDs
System Recovery Auto power on after power loss
Time Built-in real time clock
USB 3G Dongle Yes
Security Multi-level password (3 levels, up to 18 accounts) protection with authentication key for remote access
Dimnesion (WxDxH) 17"W x 13"D x 2.6"H
Operating Temperature -10°C ~ 50°C / 14°F ~ 122°F
Operating Humidity 0 ~ 90%
Power Consumption 12VDC, 70W Max
Certificate FCC, CE, LVDS, PSE, etc
Max Resolution:
960H (960 x 480)
Audio:
8 Audio-in & 2 Audio-out, bi-directional
Mobile App:
TapCMS / TapCMSHD
Mac Compatibility:
Yes, Mac OSX 10.7+
HDD Storage:
5 x SATA Slot up to 25TB HDD
PTZ / POS, or GPS:
RS485 / RS232
Dimension:
W17"×D13.8"×H2.6"
Aposonic Mobile App Introduction (03:26)
This video is a demonstration of Aposonic's iPhone/Android App, TapCMS. TapCMS is the mobile app designed for Aposonic's line of models: A-S0402R17, A-S0802R18, A-S0802R19, A-S0802R22, A-S0808R22FD, A-S1602R20B, A-S1602R25, A-S1604R20A, A-S1604R26, A-S1616R20FD, A-H4D1, A-H2A8D2, A-H4K1, A-H2A8K1.
  • Aposonic Mobile App Introduction
    This video is a demonstration of Aposonic's iPhone/Android App...

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review

Sign up for our newsletter

View Cart Go To Checkout