Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3

A-AT4H1 Pro H.264 4-Channel TVI/AHD 1080P/1080P-Lite/720P/960H/IP Recording, 1-Audio/2-Alarm, Mac Ready

In Stock


  • 1080P/1080-lite/720P/960H/D1/Half D1/CIF Real-Time Recording / Playback Quality.
  • 4-CH IP-CAM / TVI/AHD/960H 4-in-1 DVR with hexaplex operation – record, live, playback, backup, control, & remote access.
  • H.264 High Profile video compression/decompression with configurable quality.
  • Max record capabilities – IP-CAM: 120/100fps@1080p/720p, TVI/AHD: 60fps@1080p, 120fps@1080p-lite/720p/960H.
  • Max playback capabilities – 60fps@1080p, 120/100fps@1080p-lite/720p/960H.
  • Max 40Mbps incoming bandwidth for IP-CAM.
  • 1 x HDD bay, support up to 10TB. 1 x Audio-in / 1 x Audio-out, 2 x Alarm-in. Firmware upgradable.
  • RS-485 for PTZ, keyboard control, POS, and GPS support.
  • Dual streaming technology to encode recording stream and network stream separately.
  • Support push alarm notification to mobile phones.
  • Live view and access control through Internet Explorer, Firefox, Chrome, and Mac OSX/Safari. Streaming live video / playback on mobile smart phones or tablets via free app.



H.264 Video Compression (1) Audio In
(1) Audio Out

IP-CAM: 120fps@1080p/720p

Analog HD: 60fps@1080p, 120fps@1080p-lite/720p; Analog: 120/100fps@960H

VGA Output
HDMI Output
Main monitor/Call Output
Remote access from
PC, Mac OSX, iPhone/iPad, and Android Devices
USB Back up and Configuration
 io.gif (2) Alarm In
(1) Alarm Out NC/NO

RS-485 for PTZ, keyboard control, POS, and GPS support

With the passion of perfection, Aposonic has released its newest online monitoring platform, which provides users the capability to consolidate multiple surveillance DVRs, from the same series, over the web browser or the CMS software. Users can monitor multiple DVRs and locations at the same time. Up to 64 channels of live streaming cameras can be viewed simultaneously.

Aposonic A-AT4H1 DVR supports streaming video for PC, Mac OSX, iPhone, iPad, Android phone and tablet. Users are able to monitor their most valuable assets anywhere around the world with their mobile devices over WiFi or 4G/3G network.

Watch your properties on the go with our TapCMS mobile app. TapCMS is capable of viewing live video feed, playing recorded footage, taking snapshot, controlling PTZ cameras, and switch between multiple DVRs.

Compatible with iPhone, iPad, Android Phones and Android Tablets. Monitor your precious assets anytime, anywhere.


Video Compression H.264 High Profile
Multiplex 4-CH IP-CAM / TVI, AHD, 960H Turbo DVR with hexaplex operation – record, live, playback, backup, control, & remote access
Video Input 4 Ch BNC 1 Vp-p / 75 Ohm
Video Output HDMI * 1, VGA * 1, BNC video out * 1
Video Format IP-CAM: Onvif Profile S ;  Analog: NTSC/EIA or PAL/CCIR AHD or Analog
Display Resolution HDMI & VGA @ 1920 x 1080, BNC @ 720 x 480 / 720 x 576
Digital Zoom 2X & 4X
Record Rate IP-CAM: 120/100fps@1080p/720p, Analog HD: 60fps@1080p, 120fps@1080p-lite/720p/960H
Playback Rate 60fps@1080p, 120/100fps@1080p-lite/720p/960H
Playback Simultaneously 1/4/9
Record Mode Manual, Scheduled, Alarm, Motion
Record Feature Pre-record time: 0-10 sec, Post-record time: 0-60 min, Video Motion Detection, Video Loss Detection
Network Connection RJ-45 100M / 10M bps Ethernet connector
Web Access Internet Explorer (Control Interface & Video Streaming), Firefox, Chrome, Safari
Remote Users Up to 8 users simultaneously
Mobile App TapCMS for iPhone / iPad / Android Phone & Tablet
Event Notification E-Mail / Push alarm to mobile devices
Audio In 1x RCA In, Line-in level (100mV - 1Vrms)
Audio Out 1x RCA Out, Line-in level (up to 1Vrms)
Alarm In 2 contact or TTL/CMOS signal, polarity selectable
Alarm Out 1 Normally open or Normally Closed relay output
RS485 2-pin for keyboard and/or PTZ control
System Recovery Auto power on after power loss recovery
HDD SATA x 1, up to 10TB
Timer Built-in real time clock
Watch Dog Timer Yes
Security Multi-level password (4 levels, up to 18 accounts) protection with authentication key for remote access
Dimension (WxDxH) 7.5" W x 7.9" D x 1.8" H / 185 W x 195 D x 44 H mm
Operating Temperature -10°C ~ 45°C / 14°F ~ 113°F
Operating Humidity 0 ~ 90%
Power Consumption 12VDC, 36W Max
Certificate FCC, CE, LVDS, PSE, etc
Aposonic Mobile App Introduction (03:26)
This video is a demonstration of Aposonic's iPhone/Android App, TapCMS. TapCMS is the mobile app designed for Aposonic's line of models: A-S0402R17, A-S0802R18, A-S0802R19, A-S0802R22, A-S0808R22FD, A-S1602R20B, A-S1602R25, A-S1604R20A, A-S1604R26, A-S1616R20FD, A-H4D1, A-H2A8D2, A-H4K1, A-H2A8K1.
  • Aposonic Mobile App Introduction
    This video is a demonstration of Aposonic's iPhone/Android App...

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review

Sign up for our newsletter

View Cart Go To Checkout